DJI Avata 2 vs DJI Avata: Procurement Guide
Compare DJI Avata 2 and DJI Avata cameras, goggles and controller pairings, flight times, and model-specific accessories for FPV kit orders.
Choose DJI Avata 2 for a new first-person-view kit if you need 4K slow motion at 100 fps, a 10-bit grading workflow, or more time between battery changes under comparable working conditions. The original DJI Avata is worth evaluating when crews already have compatible goggles and controls, a stocked battery pool, and an approved 4K/60 workflow. Start with the shot list and the gear you own. A change of airframe can also change the power kit, the operator's view, and the handoff to post-production.
Compare the aircraft and recording formats
| Part | What to look for | Matching products |
|---|---|---|
| Takeoff weight and endurance | Avata 2 is approximately 377 g, with up to 23 minutes of flight and 21 minutes of hover. Avata is approximately 410 g, with approximately 18 minutes of hover. DJI also quotes up to 18 minutes of flight for Avata in its launch materials. | |
| Camera hardware | Avata 2 has a 1/1.3-inch, 12 MP sensor. Avata has a 1/1.7-inch, 48 MP sensor. Both list a 155-degree maximum field of view and an f/2.8 aperture. | |
| Recording and stabilization | Avata 2 records 4K up to 60 fps in 4:3 and 100 fps in 16:9. It also records up to 120 fps in 16:9 2.7K and in 1080p, and offers 10-bit D-Log M, RockSteady 3.0+, and HorizonSteady. Avata records 4K up to 60 fps and 2.7K or 1080p up to 120 fps in supported setups, with D-Cinelike, RockSteady, and HorizonSteady. | |
| Transmission and latency | Avata 2 uses O4, rated at up to 13 km FCC or 10 km CE/SRRC/MIC, and 24 ms with Goggles 3 at 1080p/100 fps. Avata uses O3+, rated at up to 10 km FCC, 6 km SRRC, or 2 km CE. DJI lists under 28 ms with FPV Goggles V2 at 810p/120 fps and under 30 ms with Goggles 2 at 1080p/100 fps. | |
| Guards and positioning | Both have integrated propeller guards and Turtle mode. Avata 2 has downward and rear binocular visual positioning plus downward ToF sensing. Avata has downward binocular vision and ToF sensing. | |
| Goggles and controls | Avata 2 pairs Goggles 3 or N3 with the corresponding generation 3 controls, and Goggles 2 or Integra with the corresponding generation 2 controls. DJI lists Goggles 2, Integra, and FPV Goggles V2 for Avata, with RC Motion 2, DJI Motion Controller, or FPV Remote Controller 2. | |
| Storage and flight batteries | Avata 2 has 46 GB of internal storage and a 31.7 Wh flight pack. Avata has 20 GB and a 35.71 Wh pack. Both support microSD. |
Send this list as it is and get one price for every part.
Quote the full parts list →DJI rates Avata 2 for approximately 23 minutes of forward flight and 21 minutes of hovering. For the original Avata, the specifications list approximately 18 minutes of hover time, and DJI's launch materials also quote up to 18 minutes of flight. The forward-flight and hover figures describe different tests. Avata 2's flight figure comes from a windless run at a steady speed with recording off and the battery run down to zero. For scheduling, record how long each aircraft can rehearse, reposition, and capture footage with your landing reserve and the batteries the crew will use.
Transmission figures describe clear, interference-free test conditions and depend on the radio standard. Avata 2's quoted 24 ms is for the 1080p/100 fps live feed on DJI Goggles 3. The original Avata's sub-28 ms figure is for an 810p/120 fps feed on DJI FPV Goggles V2. DJI publishes a separate figure for Goggles 2. Evaluate the view through the exact headset the pilot will wear. Walk through a representative site and check the image at the intended camera positions before committing the kit to a shoot.
Match the aircraft to the shot list
For moving shots that cut between bright and shaded areas, start with Avata 2 and give the editor 10-bit D-Log M clips to test against the main camera. Look at shadow noise, bright windows, and how much correction it takes to keep the sequence consistent. The original Avata has a higher published effective pixel count, while Avata 2 has the larger sensor format. Judge video from the original files at the intended delivery resolution. Where an existing Avata already produces acceptable files under the lighting you expect, that test can support keeping it in service.
For a brief that calls for 4K slow motion, verify the format at the start of the evaluation. Avata 2 records 100 fps in 16:9 4K, while its 4:3 4K option tops out at 60 fps. The original records 4K up to 60 fps and offers higher frame rates at lower resolutions. Have the editor check playback speed and framing after stabilization and any crop for delivery. If the job requires both horizontal and vertical edits, frame the same test shot for both exports before choosing a recording mode.
Both aircraft have integrated propeller guards and a Turtle mode. Avata 2 uses downward and rear visual positioning in Normal and Sport modes. The original has downward sensing. DJI lists Avata 2 without obstacle avoidance, so keep the flight path clear and give the operator room for takeoff, turns, and recovery. For training or a controlled indoor demonstration, have the instructor and pilot review where the aircraft will pass, where people will stand, and how to end a run early. Evaluate the goggles and control style on the same course with each pilot.
Match the goggles, controls, and spares
For Avata 2, DJI's linking table lists Goggles 3 and Goggles N3 with RC Motion 3 or FPV Remote Controller 3. It lists Goggles 2 and Goggles Integra with RC Motion 2 or FPV Remote Controller 2. For the original Avata, DJI lists Goggles 2, Goggles Integra, and FPV Goggles V2 with compatible second-generation controllers or the original DJI Motion Controller. Write down all three model names before buying an aircraft-only unit. Keep the firmware versions on the acceptance sheet and verify that the required recording options appear in the goggles.
Need a quote for this? Tell us what you need →
If the brief calls for Manual mode on Avata 2, include the supported FPV Remote Controller for the chosen headset. If the primary pilot prefers motion control, test that configuration during the trial and identify it on the packing list. For a shared kit, set aside time for each operator to adjust headset fit and review the display. Include the correct charging and data cables for the headset, controller, and aircraft. Inventory the microSD cards and confirm which device records each file the crew expects to hand over.
Order batteries, charging hubs, propellers, and filters by airframe model. If you are replacing an Avata while keeping it as a spare, give each aircraft its own labeled power and propeller stock. Check how many charging positions and suitable power adapters each crew will have during the day. Avata 2 offers 46 GB of onboard storage and the original Avata offers 20 GB. Both take microSD cards. Test a full record-and-copy cycle with your chosen media and leave enough time to confirm the footage before clearing storage.
Decide what a shared kit must include
For a crew that hands the aircraft between operators, make a packing list for a complete station. Include a charged headset, the correct control device, aircraft batteries, an approved charging setup, and the media needed for the day's files. Decide which items each operator keeps and which stay with the aircraft. If you plan to rotate batteries across several consecutive takes, have a crew member time the full cycle from landing through battery change, recording restart, and readiness for the next pass. A complete second station may need more than a second airframe if both crews work at once. Use the rehearsal to quantify which items must be duplicated.
Specify the market, battery shipment, and delivery checks
Record the destination, exact aircraft and bundle, goggles, controller, battery count, applicable markings, and service coverage on the order. DJI lists Avata 2 as C1 for the EU. For an original Avata or an imported kit, ask for the actual airframe label and any documentation required at the destination. Check which radio standard applies there before relying on a range figure. For older stock, ask the supplier to confirm the included hardware and the condition of the flight and headset batteries. Have the receiving team verify the serial numbers against the packing list.
The published flight-pack energy figures are 31.7 Wh for Avata 2 and 35.71 Wh for Avata. Use the actual battery labels when preparing shipping details, including any separate goggles batteries. Tell the carrier or forwarder which lithium batteries will be installed in equipment, packed with equipment, or shipped separately. Confirm the route-specific acceptance, terminal protection, packaging, and documentation before dispatch. If operators are carrying the kit as passenger baggage, check their airline's current spare-battery instructions for the itinerary.
On receipt, use a sample kit to confirm each required pairing and charging combination. Record a clip at the intended resolution, aspect ratio, frame rate, and color setting. Play it in the editor's software and check that the team can retrieve files from both the card and internal storage. For multi-kit orders, label shared goggles and controllers and record which airframes they have been tested with. Contact our team with the destination, kit count, existing goggles and controllers, preferred control style, and recording requirements so we can review the proposed configuration with you.
Frequently asked questions
Is Avata 2 worth buying for 4K slow motion?
If the deliverable calls for 4K at 100 fps, Avata 2 is the option here. Check its 16:9 mode with the proposed goggles and import an original test clip.
Can I keep my Goggles 2 or Goggles Integra?
Yes. DJI lists both for Avata 2 with RC Motion 2 or FPV Remote Controller 2. Verify firmware and linking on the exact kit.
Will DJI FPV Goggles V2 carry over to Avata 2?
DJI lists FPV Goggles V2 for the original Avata. For Avata 2, choose a headset and matching controller from its documented pairings.
Which controllers support Manual mode on Avata 2?
DJI lists FPV Remote Controller 2 and FPV Remote Controller 3. Use the controller generation that matches the supported headset.
Can the models share flight batteries or hubs?
Specify each generation’s flight batteries and compatible charging hub separately. Check the model names on the order and the battery labels on receipt.