ChinaDroneRequest a quote →

DJI Agras T50 vs DJI Agras T40 Procurement Guide

Updated · 8 min read

Compare spray flow, spreader capacity, terrain sensing and field charging to specify a T50 or T40 kit for an agricultural crew.

Choose the Agras T50 if a crew regularly reaches the T40 spray system's flow limit or runs out of hopper space while spreading light seed. Both aircraft carry a nominal 40 L of liquid and up to 50 kg in the spreader. A farm that already completes its work with a T40 may gain more from a second complete T40 station than from moving one pilot to a T50. Check a recent field log before deciding. Where did the crew spend time waiting, and would either proposed kit have shortened that wait?

Compare the equipment offered

DJI Agras T50 vs DJI Agras T40 comparisonPayload depends on conditions. Application width varies with the material, site and coverage requirement.
PartWhat to look forMatching products
Spray tank and maximum flowBoth carry 40 L with a nominal 40 kg spray payload. T50 delivers 16 L/min with two sprinklers or 24 L/min with four. T40 delivers 12 L/min with two.
Effective spray widthT50 lists 4–11 m at 3 m above the crop. T40 lists a maximum of 11 m at 2.5 m and 7 m/s.
SpreaderT50 has a 75 L hopper and a published 8 m spread width. T40 lists 70 L and 7 m. Both specify a 50 kg internal load.
Takeoff weight at sea levelT50 lists 92 kg for spraying and 103 kg for spreading. T40 lists 90 kg and 101 kg respectively.
Standard batteryT50 uses DB1560 (BAX702-30000mAh-52.22V). T40 lists BAX601-30000mAh-52.22V.

Send this list as it is and get one price for every part.

Quote the full parts list →

Tank volume measures the space available. Payload measures the weight the aircraft can carry. Those limits can be reached at different points, especially when the density of a liquid or a batch of seed changes. DJI publishes its maximum takeoff weights at sea level. Have the local operator confirm the permitted load for the actual elevation and temperature, including the recommendation shown by the aircraft. A tender that requires every tank to leave full can set a condition the operator cannot meet at the intended site.

Ask for the last completed job sheet from each crew. Compare the litres applied, time at the refill point and number of trips back to the field entrance. If the operator spent the afternoon waiting for water at a distant gate, a higher maximum flow rate would empty the tank sooner while leaving the same collection trip on the schedule.

Specify the work in the field

For a farm buying primarily for spraying, ask the agronomist for the application volumes on the jobs that occupy the most crew time. Then ask the operator whether the current pump reaches its limit on those jobs. The standard T50 delivers up to 16 L/min, compared with 12 L/min for the T40. The higher figure matters where the existing aircraft has to slow down to deliver the specified volume. Where both systems can already deliver it, consider field shape, refill access and time spent turning before attributing a productivity gain to the T50.

DJI's 24 L/min T50 figure belongs to the optional four-sprinkler installation. An offer that lists this figure alongside a standard two-sprinkler packing list needs clarification. Ask for the kit part number, installation status and responsibility for commissioning. For an orchard, agree on a representative block and have the farm assess the resulting coverage with its usual inspection method. Record which sprinkler configuration produced the result. The published widths in the table come from different conditions and give the buyer little basis for predicting coverage within a particular canopy.

For a seed or granular fertilizer order, compare the material as supplied to the farm. Both spreaders specify dry granules from 0.5 to 5 mm. The T50 has five more litres of hopper space, which can help when a bulky seed fills the hopper before it reaches the mass limit. A dense material can reach the same 50 kg limit in either aircraft. Have the supplier identify the spreader in the offer and demonstrate that the crew can weigh a typical fill, empty the hopper and clean it between materials. Those tasks recur each time the farm changes product.

Evaluate sensing on the proposed site

The T50 has front and rear phased-array radars and binocular vision. The T40 pairs an omnidirectional radar with a backward and downward radar and also uses binocular vision. DJI lists terrain following on inclines up to 50 degrees for the T50 and 30 degrees for the T40. Use those figures to decide which sites merit a demonstration. A single slope figure cannot describe a terraced orchard with sharp changes of grade, sparse visual texture and wires near a field boundary.

Need a quote for this? Tell us what you need →

Have the pilot walk the proposed demonstration area with someone who knows the farm. Identify boundaries, wires and places where the operator would suspend work. DJI specifies lighting, surface detail and flight-mode conditions for T50 terrain following and obstacle bypass, and advises against using bypass around wires. Set the assessment around how clearly the pilot can recognize those limits. If the order covers several farms, keep the site description with the demonstration record so the result can be interpreted by the next manager.

Build a kit each crew can use

Separate the spray package, spread package and field power equipment on the purchase order. DJI explicitly rules out fitting the T50 spraying system to the T40. A shared tank capacity or familiar sprinkler designation therefore gives a workshop insufficient grounds to pool the complete assemblies. Photograph the labels on existing tanks, batteries and chargers and ask for written confirmation of each proposed pairing. Mark any spares that can serve only one crew, particularly when both aircraft will be maintained from the same vehicle.

Check how the batteries will be cooled and charged where the work takes place. DJI lists different pack identifiers even though both standard packs are rated at 30 Ah and 52.22 V. For the T50, the C10000 power supply has different output limits on different mains inputs. Give the supplier the actual supply available at the farm and request the matching cables and power equipment by model. Record time to cool, connect, charge and return a pack to service during the trial. Published charging times describe particular conditions, while the crew needs a full rotation that works through successive refills.

Count equipment at the point of use. If two crews will leave the depot in different directions, assign each its own power source, cables, cooling equipment and cleaning supplies. If one crew alternates between spraying and spreading, time the changeover with the tools that will travel in the vehicle. Include the return to spray configuration in that trial. An order can contain every named attachment and still leave the operator without a clean place to put the removed tank or a suitable way to transport it.

Confirm destination and handover

Ask for the airframe, controller, battery and charging equipment designations for the delivery market. Have the receiving service partner confirm coverage against those identifiers and identify who can inspect a damaged pack or repair a pump. For a fleet split across regions, keep the documents with the individual aircraft record. A familiar generator name on an offer is insufficient to determine its output connections or the cables supplied for a particular depot.

Give the freight forwarder the pack model, label photographs, quantity and proposed packing arrangement. The standard pack ratings imply about 1,567 Wh each. Use the delivered label and battery test documentation for freight review, and ask the carrier to confirm acceptance for the route before agreeing to a collection arrangement. Include replacement packs in the discussion. A standalone pack sent to a remote crew is a different consignment from the original equipment shipment.

At handover, reconcile the tank, sprinklers, hopper, charging cables and pack serial numbers with the signed offer. Ask the receiving crew to perform a documented clean-water check and a separate spreader inspection if both packages were ordered. Retain the configuration used for acceptance alongside the field results. Contact our team with your crop, primary application, terrain, destination, available field power and existing Agras inventory so each proposed aircraft can be compared as a working kit.

Frequently asked questions

Which model holds more spray liquid?

Both spray tanks hold 40 L. The T50 difference is the greater available delivery rate.

Does every T50 deliver 24 L/min?

That maximum requires the optional four-sprinkler configuration. Specify it explicitly if the farm needs it.

Which spreader suits low-density seed?

Evaluate the T50 when the seed fills a 70 L hopper below its weight limit. Its 75 L hopper provides more volume.

Can our T40 use the complete T50 spraying system?

DJI lists this pairing as incompatible. Identify replacement spray assemblies by aircraft model.

What should we send for a field-power review?

Provide the local supply details, charger and generator labels, pack models, and the number of crews charging at the same time.