ChinaDroneRequest a quote →

DJI Agras T40 vs XAG P100 Pro: Procurement Guide

Updated · 8 min read

Compare liquid and granular capacity, field turnaround, power equipment and service questions for an agricultural drone purchase.

The XAG P100 Pro deserves the first field trial when a farm regularly brings its aircraft back with battery capacity to spare and an empty liquid tank. Its 50 L tank offers room for another 10 L compared with the DJI Agras T40, subject to the weight limit. For a contractor who mostly spreads dry fertilizer, the choice is closer. Both machines can carry up to 50 kg of granules, and a crew with serviceable T40 equipment may gain more by keeping a familiar system through the next planting season.

Compare the equipment going to the field

DJI Agras T40 vs XAG P100 Pro procurement comparisonTank volume and payload are separate limits. Confirm the permitted operating load for the site.
PartWhat to look forMatching products
Liquid systemT40 holds 40 L with a 40 kg operating payload. P100 Pro RevoSpray 3 holds 50 L with a 50 kg rated payload.
Maximum liquid flowDJI lists two 6 L/min pumps, totaling 12 L/min. XAG lists 22 L/min for RevoSpray 3. Both figures describe the equipment at maximum flow.
Dry materialT40 has a 70 L hopper rated for 50 kg. P100 Pro RevoCast 3 has an 80 L hopper rated for 50 kg.
Granule diameterT40 specifies dry particles of 0.5–5 mm. RevoCast 3 lists 1–6 mm granules.
Flight batteryT40 uses a 30 Ah, 52.22 V battery. P100 Pro specifies a 20 Ah, 962 Wh B13960S.
Ground powerMatch the DJI charging equipment to the T40 pack. XAG rates its CM13600 at 1,300 W on 100–120 V AC and 3,400 W on 220–240 V AC.

Send this list as it is and get one price for every part.

Quote the full parts list →

Start with the records from a busy day. For each return to the loading point, identify what brought the aircraft back. An empty tank, a battery change, the end of a field and a move to another farm each tell a different story. Count the returns that extra tank capacity could actually have avoided. On a route of small, separate plots, the crew may finish each block with liquid still on board. A larger tank will have little effect on those moves.

Size the liquid tank for the actual job

Take a field that needs 200 L of prepared liquid. With a water-like liquid, full permitted loads and no allowance for residue, that volume divides into five T40 fills or four P100 Pro fills. The extra capacity saves one visit to the loading point in this example. Now repeat the exercise with last season's field sizes and the permitted load at each site. Partial fills at the end of small jobs can change the result considerably.

A litre measures volume and a kilogram measures mass. Ask the farm manager to supply the density of the intended liquid and the weight limit for the site. A liquid heavier than water can reach the mass limit before it reaches the tank's fill line. DJI also qualifies its payload figures for altitude. Use the lower applicable limit in the buying worksheet and identify which fields would still benefit from the larger tank.

For an orchard crew, include time spent moving the service vehicle, getting access to water and cleaning equipment between blocks. For a broadacre contractor, include the wait when two crews draw from the same refill point. Ask the demonstrator to record the time at which the aircraft is ready to leave again after each return. That gives the purchaser a measure of the whole crew's work and makes the value of a saved refill visible.

Check fertilizer fit and changeovers

The P100 Pro has the larger granular container. Its extra space is most relevant with bulky material. Take a familiar bag of fertilizer and establish how much space a weighed sample occupies. Use its bulk density to estimate the mass each container can accept before reaching either the volume limit or the rated payload. Dense fertilizer may bring both machines to their common weight limit with unused space in each hopper.

Ask for a demonstration using a representative permitted dry product from the farm's own stock. Keep the packaging and lot identification with the results. Inspect the material that remains after emptying and see how the operator reaches surfaces that need cleaning. On a contract that switches crops during the day, the minutes spent removing the last of a previous product matter. Ask the person who will actually clean the equipment to evaluate that part of the demonstration.

Need a quote for this? Tell us what you need →

Build a working kit around each airframe

Specify the spraying and spreading equipment as separate lines. For XAG, identify RevoSpray 3 and RevoCast 3 by name and confirm which is installed and which travels separately. For DJI, identify the T40 spreading system and the components included with the liquid tank. Ask for a photograph of the actual changeover kit laid out beside the aircraft. A second task module has limited value to a mobile crew if its fittings or protective transport case stay at the depot.

Give the electrical lead the nameplate details for the proposed charging equipment. XAG lists different CM13600 output ratings on lower and higher mains voltages. A charging demonstration on a workshop supply can therefore give an unrealistic picture of the farm's available turnaround. Have the crew use its intended supply and record charging, cooling and queue time across several consecutive returns. Count the healthy packs ready at the busiest point before deciding how many spare packs to buy.

For an existing fleet, inventory each battery by model, condition and assigned charger. DJI specifies a 30 Ah pack for the T40. XAG identifies its P100 Pro pack as the B13960S. The capacity printed on a pack alone says little about the work the aircraft will finish with it. Keep separate stock records for each system and ask the supplier to show the proposed controller, battery and charging equipment working together. Include cables, adapters and any cooling equipment used during the demonstration on the packing list.

Buy previous-generation equipment with a service plan

DJI has introduced the Agras T50 since the T40, and XAG has introduced the P150 Max since the P100 Pro. Request the production status, repair arrangements and warranty terms applicable to the destination and serial numbers offered. XAG's September 2025 international discontinuation notice names the P100 and its RevoSpray 2 configuration. The P100 Pro is a different model and has no end date in that notice. DJI's reviewed Agras service notice likewise gives no T40 service cutoff.

Consider what would happen if a pump or a hopper component failed during the busiest week. Ask who diagnoses the fault, where the part is stocked and which repairs the farm's own staff can carry out. Have the supplier identify replacements for the wear items seen during the field trial. Compare the interruption each farm can tolerate with its access to another aircraft or service crew. A nearby second machine only helps if it has the right module for that day's contract.

When inspecting stored equipment, request the service history and distinguish a new spare pack from one that has spent several seasons in storage. Check the tank, seals, connectors and charger under the supplier's normal acceptance procedure. A clean exterior says little about the condition of a pump that last ran at the end of the previous season. Keep the results against the actual aircraft and module serial numbers so that a substitution at dispatch triggers a fresh inspection.

Agree on acceptance before placing the order

Ask each supplier to pack the complete traveling outfit into the intended vehicle, including both modules if the crew carries them together. Check whether staff can unload the item needed first without moving a full row of other equipment. Include a place for empty containers, wet components and the paperwork that accompanies each farm visit. A depot-based crew may accept a larger kit than a contractor who has to unload at a different gate several times a day.

For the final comparison, keep three figures from the trial together on the purchase sheet. Record how much material the crew handled, how long the full visit took and how much time the equipment spent waiting for ground support. Attach the parts list that produced the result. Contact our team with the destination, crop work, typical field sizes, dry materials, available power supply and equipment already on hand to request an itemized configuration.

Frequently asked questions

Which model carries more liquid?

P100 Pro has 10 L more nominal volume. Check density and site limits before counting that volume as usable capacity.

Which handles a heavier fertilizer load?

Both systems list 50 kg. The 80 L XAG hopper gives low-density granules more space.

What should a two-task order include?

Identify each liquid and granular module, changeover hardware, transport protection and wear parts on the order.

Does the P100 discontinuation notice cover the Pro?

The September 2025 international notice names P100 configurations. It gives no cutoff for P100 Pro.

How should we size the battery pool?

Time several returns using the intended field power supply. Count packs in use, cooling, charging and ready for flight.