ChinaDroneRequest a quote →

DJI Agras T25 vs DJI Agras T50 Procurement Guide

Updated · 8 min read

Compare tank capacity, transport dimensions, battery systems and field turnaround to select an Agras kit for your farm or contracting crew.

A grower who moves equipment through several gates before lunch has a good reason to choose the Agras T25. A contractor who can park a tender beside a large block has a different reason to choose the T50. The T50 carries twice the nominal spray load, yet the two aircraft have the same maximum flow with the same number of sprinklers. What the larger tank buys is time between refills. How much of that time becomes productive depends on the field, the vehicle and the people doing the loading.

Compare the aircraft as they will arrive at the field

Agras T25 and T50 field equipmentDJI rates payload at sea level. Actual loading follows site conditions and the aircraft recommendation.
PartWhat to look forMatching products
Weight with battery, empty tankT25 weighs 32 kg. T50 weighs 52 kg.
Folded dimensionsT25 measures 1,050 × 690 × 820 mm. T50 measures 1,115 × 750 × 900 mm, with arms and propellers folded.
Spray tankT25 holds 20 L with a 20 kg rated load. T50 holds 40 L with a 40 kg rated load.
Maximum spray flowBoth reach 16 L/min with two sprinklers or 24 L/min with four.
Effective spray widthAt 3 m above crops, DJI lists 4–7 m for T25 and 4–11 m for T50, subject to coverage requirements.
SpreaderT25 holds 35 L or up to 25 kg. T50 holds 75 L or up to 50 kg.
Flight batteryT25 uses the 15.5 Ah DB800, about 6.6 kg. T50 uses the 30 Ah DB1560, about 12.1 kg.

Send this list as it is and get one price for every part.

Quote the full parts list →

Start with the amount your crew actually loads. A tank has both a volume limit in liters and a payload limit in kilograms. A material that is dense enough can reach the weight limit before the tank is full. DJI also ties permissible payload to altitude and conditions. Ask the operator for the loads permitted by the Agras app at a representative site. Those figures give purchasing a defensible basis for comparing trips across the same block, especially where the season includes work at different elevations.

For a simple illustration, suppose an approved job requires 100 liters in total and conditions allow the full nominal tank volume on each trip. The T25 needs five tankloads and the T50 needs three, with a partial final load. That difference saves two refill stops. It says little about the length of the shift until someone measures the trip back to the tender, the refill itself and the wait for a ready battery. Substitute your own job volume and usable load before treating either aircraft as the faster choice.

Match the airframe to field access

For fragmented holdings, take the folded measurements to the vehicle. Measure the narrowest opening, including the door frame, then measure the floor length with the other equipment aboard. A machine that fits through the rear doors may still leave the charger inaccessible once the tanks and cases are strapped down. Ask the crew to unload the proposed arrangement and return it to travel condition. Time the whole exercise on a typical stop, including the walk from the vehicle to the setup area.

On a continuous block, put the T50 on the shortlist if the tender can stay close and the crew repeatedly uses most of each load. Have the field manager mark where the tender can actually park throughout the job. A drainage ditch or a single usable entrance can put the refill point farther away than it looks on a map. Use the resulting trip times when judging the value of the larger tank. A comparison made beside the easiest entrance can overstate the advantage across the farm.

For a business that alternates between spraying and spreading, make a separate estimate for each part of the season. Granular material takes up space according to its bulk density. A light material may fill the hopper well before reaching its rated mass. Ask for a demonstration with a representative approved material and record the usable load by weight. Include the time to empty and clean the equipment between assignments. A hopper that saves a trip on a large field may add handling work on a day of small jobs.

Specify the equipment around the aircraft

Request an itemized configuration for liquid work and a second configuration for granular work. Identify the spreading assembly, tank, standard sprinkler pair, any additional pair, and the fittings needed for the intended changeover. Have the supplier identify which pieces travel on the aircraft and which arrive in a separate case. When two crews share one spreading assembly, schedule a trial on the day both need it. That is often when a seemingly complete fleet order reveals a missing attachment or transport case.

Need a quote for this? Tell us what you need →

The DB800 listed for the T25 and the DB1560 listed for the T50 both have a nominal voltage of 52.22 V. Their capacities and physical weights differ substantially. Specify the pack model, approved charger, leads, power source and any cooling accessories together. In a mixed fleet, mark the cases and give the person issuing batteries a list of approved combinations. If an existing charger is part of the proposal, request confirmation for its exact model and available electrical supply before counting it as shared equipment.

Have the team run several consecutive turnarounds using the intended field power source. Start with the number of packs the order would actually include. Log when each used pack becomes ready to charge and when it can return to the aircraft. If the crew waits on power after the first few cycles, an additional tank will do little to remove that delay. The same exercise may show that moving the charging station or buying another compatible lead solves the problem without adding an airframe.

Inspect an earlier-generation purchase

DJI introduced the T25 and T50 internationally in 2024 and subsequently launched the T25P, T70P and T100. Buyers comparing the two earlier aircraft should request local stock condition, warranty eligibility and repair arrangements for the exact model. A newer Agras generation gives the buyer a reason to check parts coverage. A model launch alone establishes no worldwide retirement date for either older aircraft. For a working fleet, ask which service location can handle the battery, spreading assembly and aircraft as well as the controller.

On a used package, have a qualified technician inspect the tank, hoses, seals, connectors and folding mechanisms. Ask for the service history and identify any components replaced after a leak or impact. Have the technician demonstrate a clean-water function check and document any faults before acceptance. For a machine sold with a spreader, include a separate inspection of the hopper and discharge mechanism. Record the serial numbers for the packs as well as the aircraft so the maintenance history follows the parts that will move between crews.

Make the acceptance trial resemble a working day

Give each bidder the same field description and ask for a packing list that one named crew can operate. Include the vehicle, available power, expected mix of jobs and the longest move between sites. Request a demonstration of controller handover and retrieval of a completed field record. Someone in the office should be able to identify the field, the aircraft and the operator from that record after the crew has moved on. This checks whether the proposed kit also meets the farm's reporting needs.

Agree in advance what will settle the decision. For a grower moving frequently, it might be whether the crew can load and secure the aircraft with the equipment already on the vehicle. For a contractor working long blocks, it might be the number of completed refills before charging interrupts the shift. Write those observations alongside the measured load and the conditions on the day. They will be more useful for the next fleet order than a single figure for area covered.

If sites differ sharply, keep separate results for each field type and weight them by the number of visits expected next season.

Contact our team with the destination, field layout, intended spray and spreading duties, vehicle dimensions and any batteries or chargers already in service. Include the number of crews that need to work at the same time so the inquiry covers a usable kit for each.

Frequently asked questions

Which fits a shared farm vehicle more easily?

The T25 has the smaller folded footprint and lower weight. Measure the door opening with the tender equipment aboard.

Does T50 double the spray flow?

Both aircraft have the same rated maximum for a given sprinkler count. The T50 doubles nominal tank volume.

Can we fill the hopper to the rim every time?

Observe both the permitted weight and the volume limit. Material density determines which limit you reach first.

What should we specify for four-sprinkler work?

Name the additional sprinkler pair on the order and request a function check with the installed kit.

Are these the newest Agras models?

DJI has launched later models including T25P, T70P and T100. Confirm support and condition for each earlier-generation unit offered.