ChinaDroneRequest a quote →

DJI Agras T100 vs DJI Agras T50: Procurement Guide

Updated · 8 min read

Compare standard spray and spread loads, optional sprinklers, transport dimensions and field charging for large blocks and smaller farms.

Choose the DJI Agras T100 when crews regularly return to refill in the middle of a large block and the field station can support a larger aircraft. Choose the DJI Agras T50 when its load already covers the typical plot or its narrower folded body fits a vehicle the crew will keep. The most revealing number in an existing operation is often the time between finishing one plot and starting the next. Look at how much of that time goes to refilling, moving equipment, waiting for power and setting up again.

Compare the working configurations

DJI Agras T100 vs DJI Agras T50 procurement comparisonStandard spray configurations unless stated. Litres measure volume and kilograms measure load. Folded dimensions include folded arms and propellers.
PartWhat to look forMatching products
Liquid tank and rated loadT100 LS100 holds 100 L and carries up to 100 kg. T50 holds 40 L and carries up to 40 kg.
Maximum spray flowT100 with two or four sprinklers: 30 or 40 L/min. T50 with two or four: 16 or 24 L/min.
SpreaderT100 has 150 L of hopper volume and a 100 kg load limit. T50 has 75 L and a 50 kg limit.
Folded length by width by heightT100 measures 1105 × 1265 × 975 mm. T50 measures 1115 × 750 × 900 mm.
Field power examplesT100: DB2160 with D14000iE. T50: DB1560 with D12000iE.

Send this list as it is and get one price for every part.

Quote the full parts list →

These figures refer to the standard T100 spray system unless the dual-battery system is named. DJI publishes a separate 90 kg operating payload for the dual-battery spray assembly. A request for a T100 with two spare batteries is different from an order for the dual-battery spraying system. Specify the installed system, the number of batteries required at once and the number of additional packs that must be ready at the field station. Ask the supplier to identify the assembly by model on the packing list.

Match tank size to field and crop

For a first estimate, divide the usable litres by the farm's prescribed application volume per hectare. As a planning example, at 20 L/ha a full 100 L would cover 5 ha and 40 L would cover 2 ha. That calculation assumes the whole volume is available, the permitted load can carry it and the prescribed rate stays constant. Use the agronomist's actual rate for the job. Then allow for residual liquid, field shape, interruptions and any smaller allowable load at the site.

On long, contiguous blocks, mark each refill on the crew's most recent job sheet. Ask which journeys a larger load could remove and how long those journeys actually took. If water has to arrive by trailer, check that the loading station can replenish the T100 throughout the shift. A crew can spend the time gained in flight waiting for water on the ground. On small parcels, count the unused liquid at the boundary and the time taken to move between gates. A T50 may already finish each parcel on one fill.

For orchards or other jobs with a defined coverage requirement, ask for a water-only demonstration using the intended sprinkler configuration. Evaluate the distribution on representative foliage with the farm's usual inspection method. Write down the configuration that produced an acceptable result. Both aircraft have distinct two- and four-sprinkler flow ceilings. The presence of an optional configuration in the brochure leaves open which components, mounts and fittings the supplier plans to deliver. Tie the acceptance record to the installed hardware.

Buy spreading capacity by material

A farm switching between liquid and granular work should specify the spreader as a separate item. Compare its volume with the bulk density of the material used most often. For dense material the permitted mass may be reached while space remains in the hopper. A light material can fill the available volume first. Use a measured sample from the farm's supply to estimate a practical load. Repeat the estimate for the second most common material if one aircraft will serve several crops.

Need a quote for this? Tell us what you need →

The T50 specification covers dry granules from 0.5 to 5 mm. DJI lists several T100 augers with different material ranges, including a standard extra-large auger covering 0.5 to 10 mm. State the actual material and size distribution on the inquiry. Ask for a supervised catch-and-weigh check with that material and have the crew observe how easily the hopper empties and cleans. Include the time to change attachments and clean the equipment in a mixed-work schedule. It counts even when the aircraft spends little time in the air.

Fit the aircraft and power equipment to the field station

Measure the vehicle opening at its narrowest point, including hinges, wheel arches and the angle of the ramp. The T100's folded width of 1,265 mm compared with 750 mm for T50 can decide whether the present vehicle works. Mark the folded outline on the floor and allow room to reach the tie-down points. Check the height through the opening while loading and the space left for batteries, the spare attachment and cleaning supplies after the aircraft is secured.

Power equipment needs its own inventory. A documented T100 pairing is the DB2160 battery with the D14000iE generator. DJI lists the DB1560 battery and D12000iE generator for T50. Record the exact models already owned and obtain written compatibility for each item proposed for reuse. Include charge leads, cooling equipment and regional power connections. If the field station is shared, count the other crews drawing from it at the same time. A compatible charger at a different farm contributes nothing to the day's battery rotation.

Ask the crew to log a full sequence of loading, flight, return, battery exchange and replenishment. Start with the normal mix of charged and partly charged packs, and run enough cycles to see whether a queue builds up. A published charging interval has a starting charge, a finishing charge and test conditions. Compare how many ready packs remain at the end of the exercise. That result is easier to apply to the next field day than a charging figure measured under different conditions.

Specify lifecycle, service and handover

T50 belongs to an earlier Agras generation. DJI subsequently introduced T55 in this size class and announced the T100 dual-battery spraying system in July 2026. The announcement says sales availability varies by region. The manufacturer material reviewed gives no worldwide T50 discontinuation date. For an older-stock offer, ask who services the serial number at the destination and which batteries, pumps and wear parts can still be ordered there. For a T100 order, confirm which spray system that service location supports.

DJI's mainland China documentation also lists T100S and T200 separately from T100. Keep the intended market and exact model on the order. If the quotation uses a translated product name, ask for the manufacturer's model designation on the aircraft and the spray attachment. This is especially important when two crews intend to borrow modules from each other during harvest. Enter each supported combination against its own airframe and check the pairing with the people responsible for local repairs.

Use a representative plot as the handover exercise. Agree on the useful work to be completed, record the quantity loaded and returned, and log interruptions separately from flight time. Have the person who usually cleans the machine perform the changeover and identify any tools the kit lacks. Retain the configuration, field conditions and operator notes with the job sheet. These details let a second crew judge whether the result applies to their crop, vehicle and staffing.

For simultaneous crews, write a packing list per vehicle. Walk through a morning when one crew is spraying and another is spreading at a different site. Assign the weighing equipment, charging station, spare fittings and wash equipment to the crew that needs them. A spare attachment can sit at the depot, but each active field station needs access to the equipment that keeps its own aircraft working. Send our team the destination, plot sizes, application volumes, granular materials, vehicle dimensions and existing power equipment for an itemized inquiry.

Frequently asked questions

Which T100 figure belongs in a standard spray order?

Specify LS100, 100 L and up to 100 kg. The separate LS100-DB dual-battery spray assembly has a 90 kg operating payload.

Is a spread tank's volume the amount of fertilizer we can carry?

Calculate mass from the material's bulk density and respect both volume and permitted payload. Conditions at the site may reduce the usable load.

When is the four-sprinkler option worth evaluating?

Request it when the crop's prescribed application and coverage call for more flow. Compare distribution on the intended crop and confirm the kit on the order.

Which model is easier to fit through a narrow vehicle opening?

T50 is 750 mm wide folded. T100 is 1265 mm wide folded. Measure the actual clear opening and allow for loading and securing the aircraft.

Does the T55 announcement end T50 service?

DJI announced a newer model. Confirm T50 service eligibility, batteries and wear parts for the actual serial number and destination.