Explore drone components and find options for your aircraft.
The GOFLY-RC CP90 Quadcopter Frame Kit is a 24g airframe kit with a 95mm wheelbase, 3mm full carbon bottom board and 20*20mm ESC mounting holes. Its recommended setup uses 1104 motors, a 4in1 Mini ESC, a 300-550mAh 2-3S LiPo battery and a 2 inch propeller.
The GOFLY-RC Falcon CP130 Frame Bottom Plate is a spare carbon structural board for the Falcon CP130 FPV racing frame. Supplied as one bottom board, it features 3mm construction and 20*20mm ESC mounting holes, with recommendations for a 3 inch propeller configuration.
The GOFLY-RC FPV Multifunctional Battery Protection Board combines LiPo impact protection, digital voltage monitoring, selectable LED navigation lights and audible alarms for Type X multirotors. This 26 g accessory includes a battery strap and manual. It ships configured for 4S LiPo power; 3S operation requires a soldering modification.
The GOFLY-RC Loud Buzzer 20*20 is a buzzer accessory for Scorpion 80/90 FPV drones. It weighs 1g, uses a 5V input and has a mounting-hole specification of 20*20m. The package includes one buzzer and one cable.
The GOFLY-RC Pagoda-2 Omni Antenna is an omnidirectional, circularly polarized antenna for FPV video. It combines a 5.8 GHz center frequency with optional 80mm or 55mm lengths and four polarization/connector configurations. The package supplies one antenna weighing 8.9g.
The GOFLY-RC Pagoda-2 Omni Antenna 5.8G FPV Antenna MMCX is a separately supplied FPV antenna weighing 8.9g. It offers 55mm or 80mm lengths and selectable connector configurations. Electrical specifications include a 5.8GHz center frequency, 500MHz bandwidth, and matching limits qualified at the center frequency.
The GOFLY-RC GoPro Hero 5/6/7 Mount used for HX35 GEEK 35 is a TPU camera-mount accessory for the named platforms. Six color options are offered, and the supplied package includes one mount, one M5 nut and one M5 screw.
The GOFLY-RC Scorpion 5″ Aluminum Camera Brace is a spare camera brace for the Scorpion 5″ frame. Made from 7075 aluminum and weighing 7.5g, it is supplied as one replacement component rather than a complete UAV or airframe kit.
The GOFLY-RC Scorpion 5″ HD Camera Mount Top Plate is a spare HD camera mounting component for the Scorpion 5″ frame. It uses 1.6mm 3K carbon fiber, weighs 2g, and comes as a package containing one top plate.
The GOFLY-RC Scorpion 5″ Tail LEDs – WS2812 5050 RGB is a tail lighting accessory for the Scorpion 5″ FPV Drone. It weighs 2 g, accepts 5v DC input and supports F3, F4 and NAZE32 flight controllers. The package includes one LED unit and one cable.
The GOFLY-RC Triple Feed Patch Antenna is a directional, circularly polarized FPV video antenna centered at 5.8 GHz. It offers 9.4 dBi gain and a 55° half-power beam width in both planes. The supplied package includes one antenna and one semi-rigid SMA male–SMA male coaxial cable.
The JH-46 from Dongguan Jinhong Aviation Technology Co., Ltd. is a long-range VTOL fixed-wing UAV frame. It features carbon fiber propellers, an advanced aerodynamic design, dual GPS differential architecture, electronic speed controller telemetry and redundant airspeed measurement.
industry
industry
industry
industry
industry
industry
industry
industry
industry
industry
industry
industry