Explore drone components and find options for your aircraft.
The Gemfan BASH3.5 3525 Hurricane PC 3 Blade-M3 is a polycarbonate, three-blade propeller for 3.5-inch FPV racing and lightweight freestyle drones. It combines an 89.5 mm diameter, 2.5-inch pitch and three-hole T-mount, with recommended 1806–2004 motors and a 250–380 g takeoff-weight range.
The Gemfan D2.8 Ducted PC 3 Blade 1.5mm is a polycarbonate cinewhoop propeller for 2.8-inch ducted FPV drones. Type D2.8-3 combines a 71.12 mm diameter, 2.8 inch pitch and 1.5 mm T-mount interface, supporting normal or inverted installation in cinematic builds optimized for DJI O4 HD.
The Gemfan D3.5-3 Ducted PC 3 Blade 1.5mm is a polycarbonate propeller for 3.5-inch ducted FPV cinewhoops. It combines an 88.9 mm diameter with 3 inch pitch, supports normal and inverted mounting, and uses a 1.5 mm T-mount interface. The recommended motor is 2006, with a specified maximum takeoff weight of 350 g.
The Gemfan D4-5 Ducted PC 5 Blade is a 4-inch propeller for ducted cinewhoop quads around 600g takeoff weight. It combines PC construction, a 3.8in pitch and an M5 mount. Each package supplies two clockwise and two counterclockwise propellers for cinematic FPV builds.
The Gemfan D51 2020 Ducted PC 4 Blade is a polycarbonate propeller for 2-inch cinewhoop quadcopters used in indoor cinematic flying. It has a 50.3 mm disk diameter, 2 inch pitch and 1.5 mm center hole, with 1103–1105 motors recommended.
The Gemfan D51 2020 Ducted PC 5 Blade is a five-blade PC propeller for 2-inch cinewhoops and cinematic FPV flying. It combines a 51mm diameter, 1.9in pitch and 0.996g weight with a 1.5mm mounting hole, with motors sized 1204 and up recommended.
The Gemfan D63-5 is a five-blade polycarbonate propeller intended for compact cinewhoop and cinematic FPV applications. It combines a 63.5 mm diameter, 1.65 inch pitch and reinforced hub with a 1.5 mm three-hole mount. Packs contain four clockwise and four counterclockwise propellers, with 1105 motors recommended.
The Gemfan D75S-3 Ducted PC 3 Blade T-mount is a 75 mm, three-blade PC propeller for compact 3-inch FPV aircraft and ducted cinewhoops. It weighs 2.0 g per propeller and combines a reinforced hub, 1.5 mm shaft bore and recommended compatibility with 1804–2204 class motors.
The Gemfan D76 Ducted PC 5 Blade 1.5mm&M5 is a 76mm polycarbonate propeller for micro cinewhoop and low-KV FPV builds. Its five blades, 3in pitch, and 3g weight target lift and low-noise cinematic maneuvering, with 5mm or 1.5mm mounting interfaces and a recommended 2800KV 4S motor setup.
The Gemfan D90 Ducted PC 3 Blade M5 is a polycarbonate propeller for ducted FPV and cinewhoop builds. Its 90 mm, three-blade design weighs 2.3 g per propeller and combines M5 threaded and T-mount interfaces, with included adapters for 1.5 mm and 2 mm shafts.
The Gemfan D90 Pentablade (PC) is a 90 mm five-blade polycarbonate drone propeller for 2204 to 2306 motors. It combines a 2.4 inch pitch with 1.5 mm and 2.0 mm mounting options supporting an M5 adapter ring. Packs contain two clockwise and two counter-clockwise propellers.
The Gemfan D90S Ducted PC 3 Blade is a lightweight tri-blade propeller for micro and sub-250g drones, including freestyle and cinematic builds. Designated D90S-3, it combines a 90 mm diameter, 3.0 inch pitch and 1.5 mm shaft hole for integration with 2004 to 2306 size motors.
industry
industry
industry
industry
industry
industry
industry
industry
industry
industry
industry
industry