Explore drone components and find options for your aircraft.
The EMAX AVAN TH Turtlemode Propeller 4-blade 1 set GREEN is a 40mm, four-blade propeller accessory for the Tinyhawk. Supplied as one green set, it uses a 31mm pitch and a design intended to increase low-RPM and reverse thrust for turtle mode, with different flight characteristics from the stock propeller.
The EMAX AVAN TH Turtlemode Propeller is a purple, four-blade propeller set intended to support Tinyhawk turtle-mode operation. It has a 40mm diameter, 31mm pitch and weight of 0.63 g. Its design targets increased thrust at lower RPMs compared with the stock Avan Tinyhawk propeller, including reverse thrust for turtle mode.
The EMAX Avan Tinyhawk Prop GREEN - 1 Set is a green replacement propeller set for FPV racing and freestyle applications. It features three blades, a 40mm diameter, 23mm pitch and specified weight of 0.5 g, with recommended uses including matched EMAX aircraft spare parts.
The EMAX Avia 1050 10 Inch FPV Propeller Single is an individual 10-inch replacement propeller for FPV racing and freestyle use. Offered with CW or CCW direction selection, it is intended for use as a matched EMAX aircraft spare part.
The EMAX Avia 3630 is a red, 3.6-inch three-blade replacement propeller set for the Hawk Apex 3.5-inch variant and other craft accommodating T-mount 3.6-inch propellers. Its aggressive blade profile targets racing machines and heavier cinewhoop loads. The supplied configuration is the default set, SKU AVIA3630.
The EMAX Avia 5030 is a red, ultralight 5-inch three-blade replacement propeller set supplied in the Default set configuration. Intended for the EMAX Hawk Apex 5-inch variant and other craft accepting T-mount 5-inch propellers, it uses a moderate profile for long-range cruising, racing efficiency, and FPV replacement applications.
The EMAX Avia 9045 is a single 9 inch FPV replacement propeller offered in CW and CCW variants. Intended applications include FPV racing and freestyle propeller replacement and spare-part use for matched EMAX aircraft, with separate identifiers for each direction.
The EMAX Avia NanoX 3 Inch Propeller - RED - 2CW 2CCW is a red replacement propeller set for the Nanohawk X and craft with 1.5mm T-mounting. The default pack supplies two clockwise and two counterclockwise propellers for 3-inch FPV applications.
The EMAX Avia Tinyhawk Propeller Set - For Tinyhawk 3 provides 40mm replacement Avia TH propellers in the Default set configuration. Recommended for FPV racing and freestyle propeller replacement, it does not fit Tinyhawk 2, Tinyhawk S, or older Tinyhawk models.
The EMAX Babyhawk II / O3 / Cinehawk Part B is an AIO flight controller / ESC replacement board for Babyhawk II, Babyhawk II HD, Babyhawk O3 and Cinehawk. It has a 25.5mm x 25.5mm mounting pattern, a pre-soldered 35V 470uf capacitor and XT30 connector; DIY use requires proper mounting.
The EMAX BL2210 is a BL Series brushless motor for general propulsion, aircraft builds and custom engineering applications, with a design focus on FPV performance tuning. It has a 2210 stator size, weighs 129g and comes in 1300KV and 1560KV options.
The EMAX BL2215 is a BL Series brushless motor designed for FPV performance tuning. It has a stator size designation of 2215, weighs 151g, and comes in two KV options: 950KV and 1200KV.
industry
industry
industry
industry
industry
industry
industry
industry
industry
industry
industry
industry